Townsville Connection Road, Qld

 

BPNX and BJXA Bridge Expansion Joints for Townsville Connection Road

Australian Bridge Products supplied our BPNX Bridge Expansion Joint System and BJXA Bridge Expansion Joint for the Bowen Road Bridge duplication, part of the Townsville Connection Road project in North Queensland.

The expansion joints were installed by Albem, whose team have completed training with Australian Bridge Products and are accredited installers. This marks the second bridge project we have worked on together.

Improving a key Townsville river crossing

The $99.8 million Queensland Government project delivered a new bridge upstream of the existing Bowen Road Bridge over the Ross River, increasing the crossing from two lanes to four. The new bridge provides two inbound lanes, while the existing bridge carries two outbound lanes. Approximately 24,000 vehicles use this important Townsville connection each day.

Completed in May 2026, the bridge duplication complements the wider Stuart Drive upgrade, improving traffic flow, safety and connectivity. The project also included upgraded approaches, lighting, pedestrian and bicycle crossings, and improved connections to the underpass pathway. The wider construction works were delivered by the Albem–SGQ Joint Venture.

BPNX combines Australian made nosing with fast curing silicone

Our BPNX Bridge Expansion Joint System brings together two complementary products: PNSX Polymer Nosing and DOWSIL 902 RCS silicone sealant, forming a hard wearing, watertight system for new bridge construction and the rehabilitation of existing joints.

Designed and manufactured in Australia, PNSX Polymer Nosing forms the protective headers on either side of the expansion joint. Its impact absorbing, elastomeric formulation reinforces the edges of concrete or asphalt bridge decks, helping minimise spalling caused by heavy and repeated vehicle loads.

DOWSIL 902 RCS is a fast curing, self levelling, two part silicone sealant designed to accommodate thermal movement and vertical movement caused by traffic loading. Its rapid cure makes it particularly useful where joint sealing needs to be completed within limited work windows.

BJXA delivers an Australian made strip seal solution

Also supplied for this project, our BJXA Bridge Expansion Joint is a heavy duty strip seal system designed and manufactured in Australia. Bolted down into the bridge deck, BJXA is suitable for both new bridge construction and rehabilitation works.

BJXA combines structural grade, corrosion resistant aluminium rails with stainless steel fixings and one piece stainless steel ferrules. The ferrules are manufactured without welds, and their straight edged base helps prevent rotation within the bridge deck. The flat rail profile provides a smooth transition for vehicles travelling across the joint.

Available with flush or drape elastomeric water seals, BJXA accommodates bridge movement while preventing water and debris from passing through the expansion joint gap, helping protect the bridge components below.

Working again with accredited installers Albem

We were pleased to work with the Albem team on our second bridge project together, supporting their installation with product supply and technical guidance.

Supplying both BPNX and BJXA to the Townsville Connection Road project demonstrates the breadth of our bridge expansion joint range and our commitment to supporting Australian infrastructure with locally manufactured products.

For BPNX or BJXA product information, project supply enquiries or installer training, contact Australian Bridge Products.